Bronze Safety Relief Valve Nozzle 10, 15 & 20
DN10, DN15 & DN20 (⅜", ½" & ¾”)
A range of high quality bronze relief valves designed to comply with ISO 4126 (Safety Valves General Requirement), Ad-Merkblatt A2 (Safety Devices against Excess Pressure) and TUV requirements. They are eminently suited to the protection of static and road going cryogenic storage tanks against damaging over pressure.
There are three basic sizes, defined by the throat diameter. And each is available with a variety of inlet and outlet connections.
The valve is designed and factory set to lift repeatedly within 2% of the set pressure and to reseat above 92% of set pressure. Spring pre-compression and blow down ring settings are sealed after test to inhibit unauthorized tampering.
Flow rates at 10% above set pressure.
All valves are degreased for oxygen duty, assembled in clean room conditions and sealed in robust polythene bags prior to dispatch.
Maximum Working Pressure (MWP)
Up to 40 bar (580 psi) at -196°C to + 65°C